PROTECTIONTECH	Telephone: 425-869-7778 Fax: 425-869-7717

Saw Cut Style Preformed Vehicle Detection Loop - 18GA XLP

Designed for Vehicle Detection with:

	Parking barrier gates
	Overhead doors
	Gate operators
	Traffic signal
	Arming devices
	Vehicle Count

The Saw Cut Style 18 GA XLP preformed loop features a non-spliced, continuous wire throughout loop turns and lead-in. Labor saving, a standard 18 GA PVC loop fits in a 3/16" saw cut, only 1" deep. The polypropylene wrapped loop and machine twisted lead-in not only make installation a breeze, but eliminates false signals therefore ensuring a flawless installation. Durable XLP insulation over 19 strand copper wire means, even in frigid weather, turns of 45° or even 90° are easily accomplished.

Specifications

Loop Wire & Lead-In

One continuous length of 18GA XLP insulated, 19 strand wire through loop turns and lead-in. Machine twisted lead-in with a minimum of 12 turns per foot.

Standard Loop Sizes

2' x 6'

4' x 7'

4' x 11'

6 x 13'

6' x 17'

6 ' x 21'

2.5 x 6'

4' x 8'

4' x 12'

6' x 14'

6' x 18'

6' x 22'

6' x 28'

3' x 6'

4' x 9'

5' x 12'

6' x 15'

6' x 19'

6' x 24'

6' x 30'

4' x 6'

4' x 10'

6' x 12'

6' x 16'

6' x 20'

6' x 26'

Standard Lead-In Lengths

20', 30', 50', 75' and 100'

Outer Wrap

All loop wires are held securely together with a polypropylene back tape.

Standard Height & Width

Width of all XLP sawcut loops is 0.125". Height is based on number of turns:

5 Turns                            0.555"
4 Turns                            0.490"
3 Turns                            0.340"

General Information: info@protectiontech.com
Webmaster: webmaster@protectiontech.com

This is a secured server site. Your data is safely encrypted and is safe from unauthorized access.