| | 
| 
Controller Accessories
|
If you need accessories such as signal lights on the boom, mechanical boom lock, traffic lights, counting of vehicles, operating panels, etc. - Magnetic Autocontrol provides the solution. 
| The microprocessor-controlled, single-channel MID detector can detect vehicles without contact. Via the connected induction loop all sorts of metallic vehicles like cars, trucks, buses, fork lifts and even bicycles are easily detected. The potential free outputs can either be used for presence registration, safety devices, counters or to open and close barriers and gates. High sensitivity, rapid reaction time and maintained detection (i.e. unlimited occupations) are some of the advantages of the MID. External interference is suppressed by special measuring methods. |
 | The microprocessor-controlled, single channel MID detector can detect vehicles without contact. Via the connected induction loop all sorts of metallic vehicles like cars, trucks, buses, fork lifts and even bicycles are easily detected. |
Applications | barrier controls | | parking and traffic technology | | door and gate controls |
 | The microprocessor-controlled MID2 channel detector can be used for contactless detection of vehicles. Using the connected induction loops, cars, trucks, bicycles, fork lifts and vehicles with metal structures can be detected. The potential-free output signals can be used for presence registering, monitoring, counting and direction detecting functions, or for opening and closing barriers or gates. High sensitivity, rapid response and static behavior (i.e. unlimited occupation balancing) are advantages of the MID unit. External interference is suppressed using a special measurement method. |
 | The control panels are designed for the barrier control systems integrated in a housing entirely made of plastic. Depending on the version, one or several push buttons are featured on the front plate. Full functional safety is ensured up to a maximum distance of 300 m between the control unit and the control panel. The control cable must have a cross section of 1 mm and be shielded. A flexible, 3 m long cable provided by the manufacturer is located on the control panel and is to be connected to the junction boxes provided by the customer. Several control panels can also be connected to a single control unit. The units are operated basically using protective extra-low voltage. |
Please Contact Us For Pricing |
