| PROTECTIONTECH | Telephone: 425-869-7778 |
| |
| ||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Part # | Description | Price | |
| Buy | 4012 | 12 Volt Plug-In Power Supply (1 amp 12 VDC for use with 1100 series maglocks) | $37.80 |
| Buy | 4024 | 24 Volt Plug-In Power Supply (1 amp 24 VDC for use with 1100 series maglocks) | $37.80. |
4200 Series Power SuppliesThe 4202 and 4204 power supplies provide a field selectable 12 or 24 volt DC output. The required output voltage is accurately regulated to a fraction of a volt, even when operating under maximum and varying load conditions.
DC output is maintained at rated current, #4202-2 amp and #4204-4 amp power supplies, while continuously operating under maximum load. The extra large heat sink assures a long operating life under extreme conditions.
Both 110 VAC input and DC output is fused to protect the system against overloads and shorts and the switching regulator prevents excessive current draw. The battery charging circuit and the fire alarm input are thermally protected.
The battery charging voltage is automatically maintained in excess of the selected DC output voltage to extend battery back-up operational time. The adjustable trickle charge output will maintain the number of batteries required for emergency back up.
One output supplies continuous DC power while a second output provides switched DC power through the built-in fire alarm relay
Innovative design assures DC output cutoff by detecting ground faults in wiring to the fire panel. Unlike other supply designs that may fail to release the FAR if any wiring insulation is scraped in the connection to the fire panel.
On-board LEDs provide visual indication of power supply operating conditions. A green LED is illuminated when AC power is present. The red LED is lit to indicate DC power at the output providing a quick determination of fire alarm input status. When the amber LED is illuminated a low battery condition exists.
| Part # | Description | Price | |
| Buy | 4202 | 2 Amp Power Supply/Controller 12/24 VDC (field selectable) with switching regulator/filter/surge protection, battery charging circuit and fire alarm relay, furnished in 16" x 12" x 4" electrical box | $252.00 |
| Buy | 4204 | 4 Amp Power Supply/Controller 12/24 VDC (field selectable) with switching regulator/filter/surge protection, battery charging circuit and fire alarm relay, furnished in 16" x 12" x 4" electrical box | $267.75 |
4200 Series Power Supply OptionsAdd for larger enclosures as required to accommodate multiple options below
| Part # | Description | Price | |
| Buy | 1518 | 15" x 18" x 4" Enclosure Required to Accommodate Multiple Fused Output Boards or Relay Modules | $53.55 |
| Buy | 1824 | 18" x 24" x 6" Enclosure Required to Accommodate Multiple Fused Output Boards or Relay Modules | $204.75 |
| Buy | xBAT | 12/24 VDC 14 Amp Hour Battery Pack, includes 2 each 7Ah 12 volt rechargeable batteries with hook-up cables | $60.48 |
| Buy | xRO | Relay Module with Four DPDT Isolation Relays (4-fused SPDT and 4-unfused SPDT outputs) and 1 SPDT Auxiliary relay 9" long x 3" wide | $100.80 |
| Buy | xFO | Eight-Zone Fused Output Board (power distribution) 4-1/4" long x 3" wide | $50.40 |
| Buy | xFO/AUX | Eight-Zone Fused Output Board (power distribution) with Auxiliary power interrupt relay 4-1/4" long x 3" wide | $63.00 |
| Buy | xAO | Alarm Relay Outputs (AC power loss and low battery alert) | $18.90 |
| Buy | xCT | Enclosure Cover Tamper Switch | $27.72 |
| Buy | xPC | 110 VAC Grounded Power Cord 6' Long | $8.82 |
| Buy | xTERM | 10 Position Double Row Terminal 6-1/2" Long | $15.12 |
5100 Series Key Switch Controls| Part # | Description | Price | |
| Buy | 1518 | 15" x 18" x 4" Enclosure Required to Accommodate Multiple Fused Output Boards or Relay Modules | $53.55 |
This is a secured server site. Your data is safely encrypted and is safe from unauthorized access. |
