|
| |
|
 |
 Model
6300 1 HP Swing Gate Operator
|
For gates up to 22 feet wide, 800 lb maximum gate
weight
The model 6300 swing gate operator is designed to operate
large vehicular swing gates in residential, commercial and industrial applications. These
operators can be installed on mounting posts or directly onto a concrete
mounting pad.
Standard Features
- 1 HP continuous duty motor
- For gates up to 22 feet wide, 800 lb.
- Includes primary and built-in secondary entrapment
prevention system
- Self-adjusting, maintenance free limits
- Two convenience outlets
- Programming switches allow you to set desired mode of
operation
- Keyed release for manual operation
- Fail-safe design
- Auto-close timer
- Plug-in loop detectors
- Overlap feature for master-slave gate operation
- Gate Tracker reporting output provides operator data
to access control system (DKS systems with card access only)
- 10ºF to 140ºF (-12ºC to 62ºC)
Operator
| Part # |
Description |
Price |
|
Buy |
6300-084 |
Operator, 1 HP,
115 VAC (see note 1) |
$2,030.00 |
|
Buy |
6300-090 |
Operator, 1 HP,
230 VAC (see notes 1, 5) |
$2,324.00 |
|
Buy |
6300-094 |
Operator, 1 HP,
460 VAC (see notes 1, 5) |
$2,324.00 |
|
Buy |
6300-085 |
Operator, Secondary, 1 HP (see notes
2, 4) |
$1,673.00 |
|
Buy |
6300-086 |
Operator with DC Open, 1 HP, 115 VAC
(see note 1) |
$2,576.00 |
|
Buy |
6300-091 |
Operator with DC
Open, 1 HP, 230 VAC (see notes 1, 5) |
$2,870.00 |
|
Buy |
6300-095 |
Operator with DC
Open, 1 HP, 460 VAC (see note 1, 5) |
$2,870.00 |
|
Buy |
6300-087 |
Operator, Secondary, with DC
Open, 1 HP (see notes 3, 4) |
$2,212.00 |
Hardware Kit (select one)
| Part # |
Description |
Price |
|
Buy |
2600-243 |
Hardware Kit for Post Mounted
Operator |
$245.00 |
|
Buy |
2600-244 |
Hardware Kit for Pad Mounted Operator |
$245.00 |
Hardware kit(s) must be ordered with the operator(s).
Hardware kits include drive arm and extension arm, arm mounting brackets, arm
joint and mounting configuration hardware. Without the hardware kit, you
will not have a complete operator.
Notes
- Use this operator for single gate applications and as
the PRIMARY operator in dual-gate applications.
- Use this operator only as the SECONDARY operator
WITHOUT DC open option in dual-gate applications. This operator cannot
be used in a standalone application.
- Use this operator only as the SECONDARY operator WITH
DC open option in dual-gate applications. This operator cannot be used
in a standalone application.
- Includes 50 feet of bi-parting gate interconnection
cable.
- These operators use a step-down transformer to
achieve 115 VAC operating voltage.
- Includes two 3-1/2" (O.D.) mounting posts and
necessary hardware.
- Includes mounting base and necessary hardware.
Prices do not include shipping, handling and any
applicable taxes. Prices are subject to change without notice.
|
