|
| |
|
 |
 Model
6050 Swing Gate Operator
|
For gates up to 10 feet wide, 400 lb maximum gate
weight
The model 6050 swing gate operator is designed to operate
vehicular swing gates in residential applications. These operators can be
installed on mounting posts or directly onto a concrete mounting pad.
Standard Features
- 1/2 HP limited duty motor
- For gates up to 10 feet wide, 400 lb.
- Includes primary and built-in secondary entrapment
prevention system
- Self-adjusting, maintenance free limits
- Programming switches allow you to set desired mode of
operation
- Keyed release for manual operation
- Fail-safe design
- Auto-close timer
- Plug-in loop detectors
- Overlap feature for bi-parting gate operation
- Gate Tracker reporting output provides operator data
to access control system (DKS systems with card access only)
- 10ºF to 140ºF (-12ºC to 62ºC)
Operator
| Part # |
Description |
Price |
|
Buy |
6050-080 |
Operator with Control Board, 1/2 HP
(limited duty), 115 VAC |
$1,372.00 |
|
Buy |
6050-081 |
Operator only, 1/2 HP (limited duty),
115 VAC (see notes #3 and 4) |
$1,015.00 |
Hardware Kit (select one)
| Part # |
Description |
Price |
|
Buy |
2600-693 |
Hardware Kit for Post Mounted
Operator (see note #1) |
$210.00 |
|
Buy |
2600-691 |
Hardware Kit for Pad Mounted Operator
(see note #2) |
$210.00 |
Hardware kit(s) must be ordered with the operator(s).
Hardware kits include drive arm and extension arm, arm mounting brackets, arm
joint and mounting configuration hardware. Without the hardware kit, you
will not have a complete operator.
Notes
- Includes two 2-1/2" (O.D.) x 3-foot mounting posts
and necessary hardware.
- Includes mounting base and necessary hardware.
- Use this operator as the second operator in
bi-parting gate applications. This operator cannot be used alone.
- Includes 30 feet of bi-parting gate interconnection
cable.
Prices do not include shipping, handling and any
applicable taxes. Prices are subject to change without notice.
|
